the place for Moisture Content Meters

Address:

Kirchweg 1A

DE-74427 Fichtenberg

GERMANY

Switchboard:

+ 49 (0)7971 9193950

Fax:

+ 49 (0)7971 9193951

E-Mail: info@exotek-instruments.com

wood and building materials

MC-380XCA Dual scanning Depth

Pin-free Moisture Meter - RH functionality

The New MC-380XCA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The MC-380XCA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the MC-380CXA is programmed to calculate the RH value from the moisture content value for building material. It also has two selectable scanning depths: 10 mm and 100 mm.
FEATURES:
Features:
  • Direct read out of Moisture Content in percent water or in Relative Air Humidity (RH%)
  • Dual scanning Depths (10 mm and 100 mm)
  • Non Invasive measurement
  • Extended Material Selection groups.
  • Selectable Alarm Threshold
  • Audio Alarm
  • Hold Function
  • Density selection of wood Groups
    • Indispensable for:
    • Woodworkers
    • Cabinet and furniture makers
    • Flooring installers
    • Contractors and quality assurance inspectors
    • Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content absolute or relative humidity.

    TECHNICAL SPECIFICATION

    MC-380XCA

    INTENDED USERS

    Woodworkers, Cabinet and furniture makers Floor-ing installers, Contractors and quality assurance inspectors. Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content or relative humidity.

    WOOD

    230 different species of wood or user defined by density.

    BUILDING MATERIALS

    Ytong, Bricks, Wall tiles, Plaster, Eternit slab, Floor tiles, Sand, Sand stone, Lime stonePVC/Linoleum on concrete, Concrete, concrete slab, Clinker.

    MEASURING PRINCIPLE

    Capacitance type, non intrusive. Detection of dielectric changes due to variation of Moisture Content in the material using a High Frequency signal.

    MEASURING RANGE - CONCRETE

    Building material: 0- 98% Relative air Humidity (RH)

    MEASURING RANGE - MOISTURE CONTENT

    Wood (@ 200 kg/m3): 0- 85% H2O

    Building material: 0-15% H2O The Maximum value differs depending of the density of the material.

    MEASURING ACCURACY

    Approximately ± 1 % MC

    MEASURING GROUPS (DENSITY RANGE)

    50 Wood Groups . (200-1180 kg/m3)

    19 Building Materials Groups. (1200-3000 kg/m3)

    SCANNING DEPTH (SELECTABLE)

    Internal sensor: Maximum 10 mm. 15 mm at high density materials.

    Measuring Springs: Maximum 100 mm

    AUTOMATIC SHUT DOWN

    Yes, 30 Seconds

    BATTERY WARNING

    Yes

    WORKING RANGE

    0°C/+60°C

    DISPLAY

    LCD digital 3 ½ Digits

    RESOLUTION

    0,1 %

    CASING

    ABS Plastic

    SENSORS

    Stainless Feather Steel Springs
    Built in.

    BATTERY

    9 V alkaline, L6R22

    CASE

    Artificial Leather

    SIZE (L x H x D )

    150 x 71 x 25 mm

    WEIGHT (INCL. BATTERY)

    165 gram

    WARRANTY

    2 years